|
Boxed circle pillow |
I used just two fabrics for this Pretty in Purple boxed circle pillow. First I made the form that I would use in this pillow.
|
Boxed circle pillow form |
For this pillow I made the form and outer cover the same size. Next time I would make the cover 1 inch smaller because I think it would have looked nicer if the pillow was more stuffed. I cut the the form cover from lining fabric and stuffed it with a polyester cluster stuffing from Rowley.
|
Ready for the form |
I used the foam welt cord for this pillow as it keeps the round shape better than the cotton welt cord. One side of the pillow is a circle with the covered cord. I cut a 14" circle and the boxing strip 42" x 3". For the reverse I cut a rectangle 42" x 7 1/2" ( circumference plus 1" for seam allowance by one half the diameter plus 1/2" SA) The welt cord is sewn to either side of the boxing strip and then sew that to the circle for one side and the rectangle, seamed, for the other side.
|
Gathered sunburst |
Place the form inside the pillow fabric. Use a long running stitch along the the inside edge of the pillow front and pull the stitches tightly to form a sunburst pattern. Knot securely.
|
Interfaced fabric for buttons |
|
Buttons to be covered |
I used a fusible knit interfacing to back the button fabric. The button forms I used were 1 1/8" forms from Rowley. Next time I think I would use a slightly larger button as it was hard to cover the hole completely.
|
Sewing the buttons |
I used a mattress needle to sew on the buttons, pulling tightly to make a nice indentation on each side. I would change a few things for the next one but overall I was happy with this first sample.
No comments:
Post a Comment